Replacing the bogeys.

 

The PRR boxcar has odd bogeys so we will replace with  KUID2:58422:1025:7 the most common kind.

Trainz bogeys are setup two ways, wheel center at Y=0 (what you should do) or Y=-diameter of wheel(rail head), both work the same.

 

All you need to do is edit the config.txt.

 

Old config.txt at the bottom:

bogeys
{
  0
  {
    bogey                               <kuid:58422:100464>
    reversed                            0
  }
}

kuid-table
{
  0                                     <kuid:58422:100464>
  1                                     <kuid2:30671:9040500:1>
  2                                     <kuid2:30671:9040690:1>
  3                                     <kuid2:30671:9080810:1>
  4                                     <kuid2:30671:9080510:1>
  5                                     <kuid2:30671:98702901:1>
  6                                     <kuid2:30671:94805601:1>
  7                                     <kuid:-1:42004201>
  8                                     <kuid:-3:10013>
  9                                      <kuid:58422:100060>
}

Just replace the RED text with <kuid2:58422:1025:7>

To edit you can start CM find the car and do an "Open/ Edit Config File Text". Then do a "Submit Edit". If you do not have that bogey installed CM will download it as it is on the DLS, you get two files.

Every thing in the kuid-table is what the car needs to work and all can be replaced by things on the DLS or Built-in, do not use payware as if you do only ones who can use your content are the ones who have the same payware. Using content from the internet bad as finding it can be a pain and it could end up unavailable. If you plan to us the DLS all content must be on it or Built-in.